PLANET KVM switches are designed to enable you control multiple computers by using just one set of keyboard, mouse and VGA monitor. This solution provides users more space in facility deployment in addition to saving the cost of multiple keyboards, mice and monitors. Switch between computers by just pressing a button on the panel or pre-defined Hot Key on connected keyboard. The KVM Switch series are the perfect choice for home, office, server farm, and testing sites where there is a need to manage multiple computers efficiently and easily.   PLANET KVM Switches utilize advanced microprocessor emulation to intelligently manage each KVM port, which allows simultaneous boot-up of all the attached computers. Scroll Lock status can also be saved for each computer. Meanwhile, the KVM Switches support VGA, SVGA and MultiSync monitors to provide more flexible options for network environment.     Application   Home, Office or Test Site Multiple computers are needed but lack of space? Hate to move from one computer to another in work processing? Or just want to save expense on monitors, keyboards and mice? PLANET KVM switches are the most cost-effective and simple solution for the above bothers.   By adopting PLANET KVM switches, multiple computers can be managed by one single monitor, keyboard and mouse directly. They support commonly used operating systems including DOS, Windows, Netware, UNIX and Linux. No software drivers or system configuration are required for installation. Switching among computers is achieved simply by pushing a button on the KVM switch or a pre-defined hot key on the keyboard.  

    PLANET's KVM switches are designed to give you control of multiple computers using just one keyboard, video display and mouse. They provide more table and rack space in addition to saving the cost of multiple keyboards, mice and monitors.   Switch between computers by just pressing a button or the pre-defined hotkey on the keyboard. PLANET KVM switches are the perfect choice for home, office, server farm, or testing sites where there is a need to manage multiple computers efficiently and easily.   PLANET's KVM switches utilize advanced microprocessor emulation to intelligently manage each KVM port. This allows simultaneous boot-up of all the attached computers. Caps Lock, Num Lock and Scroll Lock status can also be saved for each computer. They support VGA, SVGA and MultiSync monitors at up to 1920 x 1440 resolutions.   Furthermore, in addition to computers with a PS/2 interface, iMAC, Power MAC and Sun Microsystems with only a USB port can also be connected through PLANET's USB-PS2 adapter and thus be controlled by a PS/2 keyboard and mouse.   With KVM-1600's Daisy Chain function, up to eight units (banks) can be daisy-chained together to control up to 128 PCs with a single console. Two buttons on the front panel allow you to quickly and easily select the switch (bank) and port. The on-screen display (OSD) feature of KVM-1600 provides a friendly interface for naming and selecting a specific PC , and eight character password protection and a search by computer name feature assists when managing a large number of computers.     Application   Home, Office or Test Site Need to use multiple computers but lack space? Hate to move from computer to computer? Or just want to save money on monitors, keyboards and mice? PLANET's KVM switch family is the most cost-effective and simple solution. Multiple computers can be managed by a single monitor, keyboard and mouse directly. iMac, Power Mac and Sun systems can also be supported by using PLANET's innovative USB-PS2 adapter. No software drivers or system configuration are required. Switching among computers is achieved simply by pushing a button on the switch or a predefined hotkey on the keyboard or via the KVM-1600's OSD function.   Server Farm Does your server farm contain rack upon rack of monitors, keyboards and mice that are all just gathering dust? You can make better use of your rack space and save money on unnecessary equipment purchases by investing in PLANET's KVM switches. They give you control of multiple computers using just one keyboard, video display and mouse to save precious rack space. iMac, Power Mac and Sun's systems can also be supported by using PLANET's innovative USB-PS2 adapter. Furthermore, the daisy-chain function and 19" rackmount design of KVM-1600 make it the best solution for user requires the ability of handling multiple platforms, ease of installation, simple to use and expandability.

    With the innovative IP-based technology, PLANET has turned the traditional KVM switches into true networking devices. The IKVM-8000 captures, digitizes and compresses video signal, then transmits it with keyboard and mouse signals through IP network. Multiple remote sites can monitor the same PC server simultaneously. With SSL authentication and data encryption, the IKVM-8000 provides a non-intrusive solution for remote access and control. The remote access and control software operates on its embedded processors only, but not on mission-critical servers, so that there is no interference with server operation or decrease on the network performance.   The IKVM-8000 will detect the current video mode of the console automatically; however, manual fine-tuning also available to receive an optimal video quality. The IKVM-8000 will accept video streams with a dot clock rate up to 110MHz, therefore, the remote VGA resolution can up to 1280 x 1024 with a frame rate of 60 Hz.   Built-in 8-Port KVM switch, user can connect up to 8 PCs to IKVM-8000. It can apply to the IP network and fully control the PCs of any platform through any at-hand browser or just work as a normal 8-Port KVM Switch in local. Supports daisy chain function, user can cascade one IKVM-8000 to multiple KVM-800 or KVM-1600, and manage this KVM chain with single IP. The IKVM-8000 shall be the choice for those who want to maintain the PC system office or home 24/7.     Application   Remotes management via network With PLANET IKVM-8000, network administrators can control a server room locally, or remotely through Internet, or both. No additional software or license fee needed, multiple users can securely access remote server by using a standard web browser to create a SSL connection.

    The PLANET DKVM-1700 is the drawer KVM with single-rail console design offering industrial level input solution, which optimizes your space utilization by controlling your systems in just 1U space on the rack. The separate rail design helps users install the KVM console more easily. You don't have to prop the heavy console during the installation but just lock the rails into the rack and then pull the KVM console into the rails. With modular design, you can easily integrate different KVM modules to fit your control system. The DKVM-1700 provides the flexibility for users to select which KVM module they need for connection.   With the PS/2 KVM Switch module, you can use PS/2 cable either to control multiple PCs or servers or connect PLANET KVM-800 / KVM-1600 up to 8 tiers. In this chain, you can control up to 128 PCs or servers with the same console. The 8/16-port Combo-Free KVM Switch module is also available to fit to most servers that doesn't support PS/2 interface. With the Combo-Free KVM Switch module, users can use PS/2 or USB type cables to control multiple PCs or servers without any concern.   The KVM switch modules are loaded with rich features, such as one local console port, Daisy chain capability, On Screen Display (OSD) menu, Password security, Searching PC server name, Hot key control, Push button and Auto-Scan control, complete keyboard and mouse emulation for simultaneously PC boot-up processes.     Application   With PS/2 Module:Compatible with PLANET KVM-800 / KVM-1600. A KVM chain can be constructed easily by using these KVM Switches.